SmartBench console Software Update
V1.4.3 Release Notes

Improvements

User Interface

• Two extra safety warnings added to the safety screen

• Reminder for user to reset the Z datum if they have loaded a new file without resetting it.

• Removed FW version popup

• Added "Console will reboot" popups to network connect and software update sequences

• Replaced outdated homing warning screen with popups and standard homing screens

• Version refresh in software update app will now pick up tags from a USB stick as well (if one is available)

• Reinstated Gcode file save into final Shapecutter screen

Bug Fixes

• Added missing information popups into Shapecutter on datum setting screens

Technical

• Moved laser off into bootup sequence and set LED to yellow if it is being turned off on startup. Also slight change to order fo bootup sequence.
• Check for hardware version to use laser commands rather than firmware version (HW v8 instead of FW v1.1.2)
• Changed the logic around the Door screen, so that it will also resume if the state doesn't start with 'Door'
• Changed the USB software update logic to be broken down into functions, and get rid of any superfluous commands
• Changed the repository filenames that the USB software update logic looks for - now looks for both 'easycut-smartbench' and 'SmartBench-SW-update' + version number (or no version number)