Our knowledgebase contains all the information you need to know about all things SmartBench
Vectric has a tool database, where you can edit settings for the tools you use. These settings are applied when you assign a tool to a new toolpath. You can later adjust the specific toolpath settings without affecting the database stored values for that tool.
When creating a cut path you will be asked to select a tool. Once a tool has been selected, you can adjust the settings, which will be specific only to the cut path you are creating. In this example we will use Quick Engrave cut path set up. Click on Edit...
Any setting you change in this Edit Tool window will only affect the cut path you are creating and will not change the Vectric tool database settings.
Confirm your changes by clicking on the OK button. If you click on Cancel, your changes will be discarded.
Click here to learn more about feeds and speeds.
Elliot. is the author of this solution
Glad we could be helpful. Thanks for the feedback.
Sorry we couldn't be helpful. Your feedback will help us improve this article.