Live Knowledgebase > SmartBench > Before you buy > What are the extraction requirements?

Please Wait a Moment
X

Knowledge Base

Our knowledgebase contains all the information you need to know about all things SmartBench

 

What are the extraction requirements?

SmartBench requires good, efficient chip and dust extraction to ensure your job completes without any interruption from waste.

< Previous | List | Next >

Minimum flow rate for PrecisionPro

You will need a MINIMUM flow rate of 70 l/sec. 

Minimum flow rate for PrecisionPro X

You will need a MINIMUM flow rate of 277 l/sec

Some materials and applications WILL require extractors with a higher flow rate.

 

 

 

 

Power specifications

If the extractor meets the power specifications of SmartBench then the extractor can be automatically started and stopped from the console.

Extractors with higher power requirements will need to be powered externally. 

Click here if you are using SmartBench v1.2 to learn more about extractor power configuration. 

Click here if you are using SmartBench v1.3 to learn more about extractor power configuration. 

 

Where can I get an extractor? 

Click here to see our standard extraction system, available on our website. 


< Previous | List | Next >

If this article didn't solve your problem, please submit a support ticket here

Kieran Buchan

Kieran Buchan is the author of this solution

Glad we could be helpful. Thanks for the feedback.

Sorry we couldn't be helpful. Your feedback will help us improve this article.

Did you find it helpful?

Yes   No
Updated on Wed, 22 May 2024