Our knowledgebase contains all the information you need to know about all things SmartBench
List | Next >
Your SmartBench is packed into four boxes and contains all the necessary components needed for installation, thanks to our expert packing department.
We’ll show you what is packed in each box, so that you can check that you’ve got everything you need before you start.
Unboxing SmartBench
We will show you everything you need to know about assembling SmartBench, from installing the first pair of legs to fitting the final cable connection.
Fitting the first pair of legs
Fitting the lower X beam
Fitting the second pair of legs
Fitting the upper X beam
Connecting the beam cable
Fitting the Z head
Fitting the dust shoe plug
Fitting the Z probe plate
Fitting the console
Fitting an extractor
Fitting the power cable
We will walk you through turning on SmartBench for the first time, setting up your Console, and adjusting any machine settings. By the time you’ve finished this section, SmartBench will be job ready!
First power up
Activating SmartBench
First homing
Setting up the Console
Calibrating SmartBench
Powering off SmartBench (including emergency shutdown)
We’ll give you an overview of your next steps, so that you can choose to set up your computer, start your first project, or keep reading up on all things SmartBench.
Next steps...
Elliot. is the author of this solution
Glad we could be helpful. Thanks for the feedback.
Sorry we couldn't be helpful. Your feedback will help us improve this article.