Our knowledgebase contains all the information you need to know about all things SmartBench
< Previous | List |
First remove the console by pushing on the locking button and remove the console cable.
Disconnect the cable by rotating it anticlockwise looking from the bottom of the machine.
Pull the clamp handles up to release them on both sides of the beam.
Lift and remove the Upper X Beam.
Pull the clamp handles up on the home end leg pair to release them.
Lift the Y Bench, remove the leg pair and use it to support the Y Bench underneath, put the leg pair on the far side of the lower beam so it can slide out of the bench
Remove the Lower X Beam by pulling it from the Y bench.
Click here to learn how to reassemble the second pair of legs.
Click here to learn how to reassemble Upper X Beam.
Click here to learn how to reassemble the console.
Click here to learn how to reconnect the beam cable.
Elliot. is the author of this solution
Glad we could be helpful. Thanks for the feedback.
Sorry we couldn't be helpful. Your feedback will help us improve this article.