Our knowledgebase contains all the information you need to know about all things SmartBench
< Previous | List | Next >
Firstly, safely shutdown the power of the SmartBench. Click here to learn how.
Then slide the Z Head at the far end of the Upper X Beam.
Remove both the signal and power cables of the Z Head by unscrewing the thumbscrew.
A: Signal cable
B: Power cable
Also remove the latch plates on both sides of the Z Head by unscrewing the thumbscrew.
C: Latch plates
Lay both the cables flat as shown in the picture
And slide the Z Head backwards to remove it.
Click here to learn how to reassemble Z Head.
Elliot. is the author of this solution
Glad we could be helpful. Thanks for the feedback.
Sorry we couldn't be helpful. Your feedback will help us improve this article.