Our knowledgebase contains all the information you need to know about all things SmartBench
We’ll show you:
How we use the CAD/CAM software to import the sculpture and generate the toolpaths.
How we set up SmartBench.
How we do a tool change.
Click here for the original Thingiverse Gecko file.
Click here for the Fusion file.
Stock material
12mm corian
Spoilboard
6mm MDF
Workholding
Double-sided tape with polyester backing and strong acrylic adhesive
Cutter 1 (cutting out)
¼ inch flat end mill
Cutter 2 (sculpting)
3mm ball-nose
Step-over
2mm (this gives a rough finish)
We also have a lot more tutorials on these articles
Elliot. is the author of this solution
Glad we could be helpful. Thanks for the feedback.
Sorry we couldn't be helpful. Your feedback will help us improve this article.