Our knowledgebase contains all the information you need to know about all things SmartBench
To ensure the wheel units on the upper beam do not crease your vinyl, the upper beam will need to be raised to a fixed position around 10mm above your material.
To set the X beam height, loosen the clamp on each end of the upper X beam.
Lift the X beam up so that the wheels are around 10mm from the material ensuring it is parallel. You may want to use a piece of material to set this more consistently.
To secure the beam, tighten the clamp handles.
Lizzie is the author of this solution
Glad we could be helpful. Thanks for the feedback.
Sorry we couldn't be helpful. Your feedback will help us improve this article.