Our knowledgebase contains all the information you need to know about all things SmartBench
Use a T15 Torx driver to remove the front 3 screws.
Carefully insert the shaft of a screwdriver into the one of the air exhausts and push the screwdriver handle towards the collet. Be very careful not to snap any fan blades as you do this.
Pry this gap apart slowly, moving onto the next exhaust port after widening the gap a few millimetres
The magnet on the top of the rotor is used for speed sensing. This magnet must be secure and free from nicks and scratches.
Elliot. is the author of this solution
Glad we could be helpful. Thanks for the feedback.
Sorry we couldn't be helpful. Your feedback will help us improve this article.