Our knowledgebase contains all the information you need to know about all things SmartBench
Loosen the clamp bolt (anti-clockwise) with the supplied 6mm hex driver.
Unplug the power and signal cables from the Z Head.
A: Power cable
B: Signal cable
To remove the spindle motor from the Z Head you will need to ensure that the orientation is correct.
The spindle motor switch (A) should be pointing straight towards the front of the Z Head.
It should look like this:
A: Spindle motor switch.
Not this:
When the spindle motor is in the correct position you will be able to pull it upwards out of the Z Head.
< Previous | List | Next >
Lizzie is the author of this solution
Glad we could be helpful. Thanks for the feedback.
Sorry we couldn't be helpful. Your feedback will help us improve this article.