Our knowledgebase contains all the information you need to know about all things SmartBench
< Previous | List | Next >
YetiPilot is available with PrecisionPro+, but can be disabled if needed.
When disabled, the YetiPilot switch on the Go screen will be hidden, and the spindle health check will be bypassed at the start of each job (i.e. the job will proceed as per standard PrecisionPro operation).
Navigate from the Lobby: Maintenance > Pro+ and use the toggle switch to turn YetiPilot on/off.
Ed Sells is the author of this solution
Glad we could be helpful. Thanks for the feedback.
Sorry we couldn't be helpful. Your feedback will help us improve this article.