Live Knowledgebase > SmartBench > Extra features > PrecisionPro + (featuring YetiPilot) > How to use YetiPilot > How to use YetiPilot, using preset profiles (basic) > How to check if a preset profile exists in YetiPilot for your material/cutter combination

Please Wait a Moment
X
Support KNOWLEDGE BASE

Knowledge Base

Our knowledgebase contains all the information you need to know about all things SmartBench

 

How can we help you today?

 Home / SmartBench / Extra features / PrecisionPro + (featuring YetiPilot) / How to use YetiPilot / How to use YetiPilot, using preset profiles (basic) / How to check if a preset profile exists in YetiPilot for your material/cutter combination

How to check if a preset profile exists in YetiPilot for your material/cutter combination

.

Check to see if your preset profile exists

There are 2 ways to see if a preset profile exists for your material/cutter combination.

Once you have determined this:
  • if you found a preset to match your material/cutter combination, proceed with the articles in this section,
  • or, if you could not find a preset to match your material/cutter combination, go to the next section where you can learn how to make your own custom profile.

At the "Go" Screen

Click on the dropdown next to the YetiPilot switch. Make sure your console is up to date as new profiles keep getting added

In our "Material Processing" Knowledgebase articles

Check the articles here - if you can see you material, open the article and check your cutter is listed. This will also be available on YetiPilot.

If this article didn't solve your problem, please submit a support ticket here

Elliot.

Elliot. is the author of this solution

Glad we could be helpful. Thanks for the feedback.

Sorry we couldn't be helpful. Your feedback will help us improve this article.

Did you find it helpful?

Yes   No
Updated on Mon, 21 Aug 2023

Related Articles


Quick Links

 

 

 

Yeti Tool Ltd – in Administration - ‘The affairs, business and property of the Company are being managed by the Administrators who act as agents of the Company and without personal liability. Ian Williamson (Licence No: 1003) and Christopher Brindle (Licence No: 7074) are licensed as Insolvency Practitioners in the United Kingdom by the Institute of Chartered Accountants in England and Wales. Christopher Brindle is licensed as an Insolvency Practitioner only in relation to companies in the UK. All of their work is conducted in accordance with the Insolvency Code of Ethics.

 

© 2024 Yeti Tool Ltd All Rights Reserved | Privacy Statement | Terms Of Use