Our knowledgebase contains all the information you need to know about all things SmartBench
The X Upper Beam should be sealed with silicone behind the XLR Elbow.
Left: A properly sealed XLR Elbow
Right: An unsealed XLR elbow
If you find that your Upper X Beam is not sealed and you want to cut metal on your SmartBench please follow the instructions below on how to seal it.
Apply silicone sealant at the opening on the back of the XLR Elbow
Spread the silicone ensuring that it fills the gaps around the cables.
A damp glue spreader or wide flat bladed screwdriver can help to reach into the gap and get a smooth finish.
Benji Pestell is the author of this solution
Glad we could be helpful. Thanks for the feedback.
Sorry we couldn't be helpful. Your feedback will help us improve this article.