Our knowledgebase contains all the information you need to know about all things SmartBench
This fix is suitable for all 7 inch consoles.
As with any electrical items, all work you carry out on SmartBench should be performed in a clean environment to avoid any debris getting into components and potentially causing damage.
You are working with a glass screen please be careful
First remove your console from your Smartbench and place it screen down onto a flat (preferably soft) surface ensuring that there is nothing on the surface that could scratch or damage the screen. We recommend laying it down on a microfiber cloth.
Once the console is removed and in a suitable position start by loosening the two PZ1 screws holding the cable strain relief clamp in place.
Now the screws are removed you will be able to lift the cable strain relief clamp out to reveal the connector.
To remove the cable simultaneously press down on the retaining clip and pull the cable out.
You can now place the new cable in place.
Elliot. is the author of this solution
Glad we could be helpful. Thanks for the feedback.
Sorry we couldn't be helpful. Your feedback will help us improve this article.