Our knowledgebase contains all the information you need to know about all things SmartBench
Skids are located on the Lower X Beams as shown in the image
E: Left side skid
F: Right side skid
To adjust the skids remove Upper X Beam first then by unscrewing the skid bolts you can replace the skids.
You can remove the handle bars by rotating them anti-clockwise.
G: Left side handle
H: Right side handle
Use a PZ1 screwdriver to remove the screws identified in the image below.
After installation of the replacement skid plates, please refer to this article on how to correctly adjust them to ensure correct squareness
Kieran Buchan is the author of this solution
Glad we could be helpful. Thanks for the feedback.
Sorry we couldn't be helpful. Your feedback will help us improve this article.