Our knowledgebase contains all the information you need to know about all things SmartBench
R: Z Head top plate
Use a 3mm allen key to remove all four screws.
Once unscrewed, lift the top plate off the Z Head.
To adjust the tension, unscrew the four motor screws with the 2.5mm allen key.
S: Belt
T: Motor
Pull the Motor towards the edge of the plate to increase the tension.
On completion of the tension adjustment, reinstate the Top Plate accordingly
Kieran Buchan is the author of this solution
Glad we could be helpful. Thanks for the feedback.
Sorry we couldn't be helpful. Your feedback will help us improve this article.