Our knowledgebase contains all the information you need to know about all things SmartBench
Be sure to screw the Z-Motor in at the same location as it was removed from. Too loose and you risk the belt falling off or jumping
Plastic can be fragile remove screw without excess force - If you need to unplug limit switches or any cables to access in the PCB case note which ones connect where so you can reinstall correctly
Steps to reinstall are the same in reverse, cable ties are there for strain relief - can easily be reinstated if you bend the cable tie at a right angle before reinstating
Kieran Buchan is the author of this solution
Glad we could be helpful. Thanks for the feedback.
Sorry we couldn't be helpful. Your feedback will help us improve this article.